HiBy Yula Earphones Care Guide: Cleaning, Cable Handling and Long-Term Storage

By HiBy - Official Online Store - Music players, Earphones ... | Published: 2026-09-10

Category: Tips & Care

Keep your HiBy Yula earphones sounding their best with a simple routine for cleaning, cable care, and safe storage. Follow these steps to extend earphone lifespan and avoid common damage.

Quick answer

Clean your HiBy Yula earphones gently with a dry, soft-bristled brush and a microfiber cloth after each use. Keep cables free from tight bends, and store the earphones in a hard case with a silica gel pack. This three-part routine prevents wax buildup, cable breakage, and moisture damage.

Your HiBy Yula earphones are built to deliver reliable sound, but small habits make a big difference in how long they last. Dust, earwax, and cable stress are the usual culprits behind fading performance, and they are all easy to manage with a few minutes of care.

This guide walks through a practical care routine for cleaning, cable handling, and long-term storage. Each step includes a checkpoint or common mistake so you can avoid the errors that quietly shorten earphone lifespan.

Why a simple care routine matters for dynamic earphones

Dynamic earphones like the HiBy Yula use a moving diaphragm to produce sound. Over time, earwax, dust, and moisture can block the nozzle or stiffen the diaphragm, which dulls treble and weakens bass. A regular cleaning habit keeps the driver working as intended.

Cables are the other weak point. Repeated tight coiling, pulling by the wire, and leaving cables in hot cars can break internal strands. Because the Yula uses a 0.78 two-pin socket, a damaged cable can be replaced, but proper handling avoids that hassle entirely.

Clean after every few listening sessions, not just when sound seems off.
Treat the cable as part of the earphone, not an accessory you can abuse.
Store earphones away from direct sunlight, heat, and humidity.

Tools you already have (and what to avoid)

You do not need a specialized kit. A soft-bristled toothbrush, a microfiber cloth, and a few cotton swabs cover most cleaning needs. For deeper cleaning, a small pick or the loop end of a cleaning tool helps lift wax from the nozzle without pushing it deeper.

Avoid harsh chemicals, alcohol wipes, and paper towels. Alcohol can dry out or crack plastic and rubber parts, while paper towels leave lint that migrates into the sound tube. Never rinse earphones under water or use a vacuum, which can damage the diaphragm.

Use a dry brush first; add a lightly dampened cloth only for the exterior.
Do not insert anything sharp into the nozzle beyond the mesh.
Skip compressed air, which can tear the delicate driver diaphragm.

Step-by-step HiBy Yula earphone care routine

Step 1: Remove ear tips and brush away dry debris: Gently pull the ear tips off the nozzles. Use a dry soft-bristled brush to sweep dust and earwax from the nozzle mesh and the ear tips. Brush away from the nozzle opening so debris does not fall inside. Checkpoint: If the mesh looks clogged, brush again before moving on. Do not push the brush into the nozzle.
Step 2: Wipe the shells and cable with a dry microfiber cloth: Wipe the earphone shells, cable, and connector housing with a dry microfiber cloth. For stubborn spots on the shells only, lightly dampen the cloth with water and wipe, then dry immediately. Never let liquid enter the nozzle or the two-pin socket. Common mistake: Using alcohol or wet wipes on the cable. Moisture and solvents can degrade the insulation and cause stiffness.
Step 3: Clean the ear tips separately: Wash silicone ear tips with mild soap and warm water, rinse thoroughly, and let them air dry completely before reattaching. If you use foam tips, replace them when they lose their shape or become difficult to clean. Checkpoint: Ear tips must be bone dry before you put them back on. Trapped moisture can reach the driver.
Step 4: Handle the cable with loose, wide loops: When coiling the cable, use loose loops about the size of your palm. Avoid wrapping the cable tightly around the earphones or a finger. Do not pull the cable by the wire to unplug it; grip the connector housing instead. Common mistake: Tight coiling creates memory kinks and breaks internal strands over time. If you see a kink, straighten it gently.
Step 5: Store in a hard case with a moisture absorber: Place the earphones in a hard-shell case with the cable loosely looped and the ear tips attached. Add a small silica gel packet to absorb moisture. Store the case in a cool, dry place away from direct sunlight and heat sources. Checkpoint: Do not store earphones in a pocket or bag without a case. Lint, keys, and pressure are common causes of damage.
Step 6: Do a monthly deep clean and inspection: Once a month, remove the ear tips and inspect the nozzle mesh for wax buildup. Use a dry brush or a cleaning loop to lift debris. Check the cable for cracks, stiff spots, or exposed wires near the connectors. If the cable shows damage, replace it before it fails completely. Next step: If you notice sound imbalance or channel dropouts, clean the mesh first. If the problem persists, contact support.

Product facts that affect care

HiBy Yves 6mm Micro-dynamic Ti-plated HiFi Earphones: Equipped with a 6mm titanium-plated composite molecular diaphragm. The titanium plating adds stiffness, but the diaphragm is still thin and delicate. Avoid poking the driver when cleaning the nozzle.
HiBy Yvain: Features a 0.78 two-pin cable socket and high-purity OCC copper Litz wire. The two-pin socket lets you replace a worn cable, but repeated stress on the connector can loosen it. Always grip the plug, not the wire, when disconnecting.

A few minutes of care after each listening session keeps your HiBy Yula earphones clean, comfortable, and ready to perform. Follow these steps, and you will protect your investment for years of reliable sound.