65W USB-C GaN Charger for HiBy Players: Fast Charging Guide

By HiBy - Official Online Store - Music players, Earphones ... | Published: 2026-10-19

Category: How-to Guides

Learn how to fast charge your HiBy DAP with the 65W USB-C GaN Charger. Step-by-step guide covers cable selection, charging safety, and optimizing power delivery.

Quick answer

Use the 65W USB-C GaN Charger with a certified USB-C to USB-C cable to fast charge your HiBy DAP. The charger supports USB Power Delivery and automatically negotiates the right voltage for your device, so you can safely top up your player in less time.

Why GaN matters for portable audio

Gallium nitride (GaN) chargers run cooler and are smaller than traditional silicon-based ones at the same power rating. For HiBy players that often travel with you, the compact size means less bulk in your bag while still delivering 65W max output. The tradeoff is that GaN chargers can cost slightly more, but the efficiency gain usually justifies it for frequent travelers.

What to watch for with power delivery

Not all USB-C cables support 65W charging. A standard cable may limit power to 15W or 60W, slowing down the charge. Use a cable rated for 100W or at least 65W to get the full speed from the GaN charger. Also, the charger's single USB-C port means you can only charge one device at a time, so plan your charging session accordingly.

How to fast charge your HiBy DAP with the 65W GaN charger

1. Connect the charger to power: Plug the 65W GaN charger into a wall outlet. Ensure the outlet is working and the charger's LED (if present) lights up. Common mistake: using an extension cord or power strip that may not deliver full power; plug directly into a wall socket for best results. Check that the outlet is not shared with high-power appliances that could cause voltage drops.
2. Select a suitable USB-C cable: Use a USB-C to USB-C cable rated for at least 65W (preferably 100W). A cable not rated for PD can limit charging speed or even overheat. Common mistake: using an old USB-A to USB-C cable, which won't support fast PD charging at all. Look for a cable marked 'USB PD' or with a 100W rating to guarantee full speed.
3. Connect the cable to your HiBy player: Insert the USB-C end into your HiBy DAP's charging port. The player should recognize the charger and start charging. Common mistake: forcing the connector in the wrong orientation; USB-C is reversible, but debris in the port can prevent a secure connection. Inspect the charging port for dust or lint before connecting to avoid intermittent charging.
4. Monitor the charging status: Check your HiBy player's screen or charging LED. If the device shows 'Fast charging' or a lightning bolt icon, PD is active. Common mistake: assuming charging is fast just because the charger is 65W; the player may negotiate a lower wattage if the battery is nearly full or if the cable is inadequate. If charging seems slow, try a different cable or restart the player to renegotiate PD.
5. Disconnect safely: Once your HiBy DAP reaches the desired charge level (typically 80-100%), unplug the cable from the player first, then from the charger. Common mistake: yanking the cable by the cord instead of the connector, which can damage the port over time. Store the charger and cable in a dry, cool place to prolong their lifespan.

Product facts

65W USB-C GaN Charger: Single-port output (Type-C): 5V 3A/9V 3A/12V 3A/20V 3.25A/65W. Total output up to 65W max. This means the charger can automatically switch to the voltage your HiBy DAP needs, from 5V for slower charging up to 20V for fast PD charging, without you having to select anything.
65W USB-C GaN Charger